Rear Lid, Removing And Installing, A5 SPORTBACK: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

There is a risk of explosions and fatal injuries due to damaged natural gas tanks.

- The natural gas tank must be checked for damage if components in the rear side or rear area are removed due to damage, such as the bumper cover, rear lid, underbody trim panels, longitudinal members, rear lid end piece, etc.

- Check for damage on fuel tanks. Refer to the appropriate Service Information .

To complete the procedure, a second technician is required to be at the following position. Refer to Removing - Lift the locking spring -2- gently with a small screwdriver and remove the spindle motor -3- from the ball pin. .
Depending on the equipment version, the following additional work must be performed. Refer to Installing - Depending on the equipment version, the following additional work must be performed .