Rear Lid Seal, Removing And Installing, A4 AVANT From Product Improvement: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Position the rear lid seal on the body flange.
- The butt joint -1- of the rear lid seal must be positioned centered to the striker.
- The cover lips -2- must be aligned evenly with the tail lamps.
-- Press on the entire length of the rear lid seal.