LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Latch Cable, Removing And Installing >> Removing

Latch Cable, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear lid lower trim panel and the latch cover. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the bolts -1 and 3- and remove the expanding clip -4-.

GWWA55-11038Courtesy of AUDI OF AMERICA, LLC

-- Remove the anti-theft protection -2- for the lock cylinder.

-- Release the safety lever -8- in direction of -arrow A- and remove the cable bracket -5- from the mount in direction of -arrow B-.

-- Disengage the cable -6- at the release lever -7-.

-- Remove the cable bracket -4- from the rear lid lock mount -3-.

GWWA55-10997Courtesy of AUDI OF AMERICA, LLC

-- Disengage and remove the cable -2- from the release lever -1-.