LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Grip Piece, Removing And Installing >> Removing

Grip Piece, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lock cylinder. Refer to LOCK CYLINDER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

GWWA55-11408Courtesy of AUDI OF AMERICA, LLC

-- Remove the cap nuts -6 and 8-.

-- Vehicles with rearview camera: remove the securing bracket -7- with rearview camera -4-.

-- Remove the cap nuts -1- and remove together with the anti-theft protection -5 and 9-.

-- Remove the grip piece downward out of the opening in the body.