LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Gas-Filled Strut Mount, Removing And Installing >> Removing

Gas-Filled Strut Mount, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the gas-filled strut on the mount from the ball pin. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .

-- Pry out the covers -arrows-.

GWWA55-11389Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -2-.

-- Remove the gas-filled strut mount -1-.