Mounting Bracket With Hook Release Lever Release Cable, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the hook release lever. Refer to HOOK RELEASE LEVER, REMOVING AND INSTALLING .
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- Remove the latch and disengage the mounting bracket release cable. Refer to LATCH, REMOVING AND INSTALLING .
-- Remove the bolts -3 and 4-.
-- Pull the mounting bracket -1- forward out of the lock carrier -2- in direction of -arrow A-, pivot it upward in direction of -arrow B- and remove it.
-- Remove the mounting bracket and free up the release cables.