LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Hood, Lids) >> 55 Hood, Lids >> Hood >> Hook Release Lever, Removing And Installing >> Removing

Hook Release Lever, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Version 1: 

GWWA55-11282Courtesy of AUDI OF AMERICA, LLC

TIP:

Version 1 has a cut-out for placing the screwdriver.

-- Pull the clip -2- out of the release lever -1- slightly in direction of -arrow A- using a small screwdriver.

-- Remove the release lever upward in direction of -arrow B-.

Version 2: 

GWWA55-11355Courtesy of AUDI OF AMERICA, LLC

TIP:

Version 2 does not have a cut-out for placing the screwdriver.

-- Push the clamp -2- inward in direction of -arrow A- and at the same time remove the operating lever -1- upward in direction of -arrow B-.