Height, Adjusting Using Spring Element

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Adjustment Gauge: 3371

Adjustment dimensions. Refer to ADJUSTMENT DIMENSIONS .

Procedure

Front bumper installed.
The spring element -5- must be tensioned.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolt -4- using a screwdriver -3-.

-- Adjust the distance between the radiator grille -1- and the hood -2-.

-- Tighten the bolt.

Tightening Specifications

Refer to OVERVIEW - LOCK CARRIER