LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 268 (Hood, Lids) >> 55 Hood, Lids >> Hood >> Hinges, Removing And Installing >> Removing

Hinges, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Vehicles with pedestrian protection: disconnect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the front lid. Refer to HOOD, REMOVING AND INSTALLING .

-- If required, remove the washer fluid reservoir. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .

-- Vehicles with pedestrian protection: remove the pedestrian protection trigger. Refer to OVERVIEW - PEDESTRIAN PROTECTION .

-- Remove the gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .

-- Bring the hinge into the "closed" position.

-- Mark the hinge installation position for reinstallation.

-- Remove the screws -arrows-.

GWWA55-11253Courtesy of AUDI OF AMERICA, LLC

-- Remove the hinge -1-.