LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 265 (Exterior Lights, Switches) >> 94 Exterior Lights, Switches >> High-Mounted Brake Lamp >> High-Mounted Brake Lamp Bulb, Removing And Installing >> High-Mounted Brake Lamp Bulb, Removing And Installing, Coupe >> Removing

High-Mounted Brake Lamp Bulb, Removing And Installing, Coupe: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the headliner. Refer to HEADLINER, REMOVING AND INSTALLING .

-- Open the mounting tabs and disconnect the connector -1-.

GWWA94-12071Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows-.

-- Pry out the retaining pin -2- on the outside using the : T10383/1  from the clip nuts -1-.

GWWA94-12035Courtesy of AUDI OF AMERICA, LLC

-- Pry up the lamp -4- for the high-mounted brake lamp using : T10383/1  from the body in direction of -arrows-. This will loosen the seals -3- from the bonding.