Cylinder Bank 1 (Right) Camshaft Housing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S5 Sportback, 2021 Audi S5 Sportback, and 2020 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the hose clamp -2- and disconnect the hose for the EVAP system.
-- Always seal the open lines and connections with clean plugs from the Engine Bung Set:VAS6122 .
All procedures are described. Refer to CAMSHAFT HOUSING, REMOVING AND INSTALLING .