Vibration Damper, Removing And Installing, 3.0L Engine: Removing
WARNING: This page is about a different car, the 2022 Audi S5 Sportback, 2021 Audi S5 Sportback, and 2020 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the lock carrier cover, right and left air intake grille as well as the bumper cover end plate. Refer to Front Bumper .
-- Release the catches -arrow- and remove the air ducts -1 and 3-.
-- Unclip the lower air duct -2-.
-- Remove the left and right bolt -2- and push the radiator bracket -1- with the bolt toward the front in direction of -arrow-.
All additional procedures are described. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .