Engine Support, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S5 Sportback, 2021 Audi S5 Sportback, and 2020 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
Left Engine Support:
-- Remove the bolts -arrows- and the engine support -1-.
Right Engine Support:
-- Remove the rear noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Remove the right drive axle cover. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and push the right coolant pipe slightly to the side. (On vehicles with 3.0L engine).
-- Remove the bolts -arrows- and the engine support -1-.