Crankcase Ventilation Module, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2020 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- When installing, install all heat shield boots back in the same positions.
-- Remove the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- If installed, check the heat shield boot.
-- Remove the connection -arrow- by pressing the release buttons on both sides.
-- Remove the bolts -1 through 6- and remove the crankcase ventilation module.