Cylinder Bank 2 (Left) Camshaft Housing, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Audi S5 Sportback, 2021 Audi S5 Sportback, and 2020 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Impact Puller: T10133/3 from Injector/Combustion Chamber Seal Tool Set: T10133C
- Camshaft Adjustment Pins: T40060 (with the engine installed)
- Locating Pins: T40116
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear
- Sealant. Refer to the Parts Information.
- M8x25 Bolts (quantity 2)