Turbocharger Vacuum Diaphragm, Replacing, 2.9L Engine, Cylinder Bank 1 (Right): Removing
WARNING: This page is about a different car, the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2021 Audi S5 Sportback, 2021 Audi RS 5 Sportback, and 2020 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the vacuum hose -4- from the vacuum diaphragm; do not damage it.
-- Disconnect the connector -3- for Turbocharger Recirculation Valve -N249-, free up the wiring harness and push to the side.
-- Remove the locking spring -1- and control rod from the turbocharger operating lever.
-- Remove the nuts -arrows- and then remove the vacuum diaphragm -2-.
-- If the vacuum diaphragm cannot be removed as described, remove the Recirculation Valve, Bank 1 -N625-. Refer to RECIRCULATION VALVE, REMOVING AND INSTALLING, 2.9L ENGINE .