Vacuum, Creating With Hand Vacuum Pump: Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
In certain situations, the vacuum can be created using a Hand Vacuum Pump:VAS6213 instead of using the engine or a vacuum pump.
-- To do so, connect the Hand Vacuum Pump:VAS6213 to the vacuum hose from the connection -B- to the Brake Servo Tester:VAS6721 .
-- Open the shut-off valve -B-.
-- Create the vacuum using the Hand Vacuum Pump:VAS6213 until a vacuum between 600 and 950 mbar (9 and 13 psi) is displayed on the Brake Servo Tester:VAS6721 .
-- Then perform the relevant tests.