Check Valve, Removing And Installing, With Vacuum Line In Plenum Chamber: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Release the retainer in direction of -arrow- and remove the vacuum hose -1-.
-- Disconnect the connector -2- for the Vacuum Sensor -G608-.
-- Carefully remove the vacuum line -3- from the plenum chamber bulkhead -4- by releasing the retainers.
-- Carefully remove the vacuum line -3- from the brake booster -1-.