LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Antilock Brake System) >> 45 Antilock Brake System >> Sensors >> Brake Lamp Switch, Removing And Installing >> Removing

Brake Lamp Switch, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the plenum chamber cover. Refer to Plenum Chamber Cover, Removing And Installing .

-- Disconnect the connector -1-.

Fig 1: Brake Lamp Switch -F- Component Location
GWWA45-10255Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- and remove the Brake Lamp Switch -F- from the brake master cylinder.

scientia non olet · About LEMON Manuals