Brake Pedal, Disconnecting From Brake Booster
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Brake Servo Release Tool: T40136
Procedure
-- Remove the footwell vent. Refer to DRIVER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .
-- Press and hold the brake pedal in the direction of the brake booster.
-- Insert the Brake Servo Release Tool: T40136 and pull in the direction of the driver seat while counterholding at the brake pedal -1- so that it does not move backward. While doing so, the mount retaining tabs -3- will be pushed out of the pushrod ball head -2-.
TIP:
For clarity, the installation position is shown with the pedal assembly removed.
-- Pull the Brake Servo Release Tool: T40136 and the brake pedal together toward the driver seat. This will pull the brake pedal off the push rod ball head.