LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (General, Technical Data (Brake System)) >> 00 General, Technical Data >> Repair Information >> Contact Corrosion

Contact Corrosion

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Contact corrosion can occur if incorrect fasteners are used (bolts, nuts, washers, etc.).

For this reason, only fasteners with a special surface coating are installed.

In addition, rubber or plastic parts and adhesive are made of materials that do not conduct electricity.

If there are doubts about whether parts can be used or not, then use new parts. Refer to the Parts Information.

Note: