LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Wires) >> 97 Wires >> Wiring Harness And Connector Repairs >> Connector Housings, Releasing And Disassembling >> Primary Lock

Primary Lock

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

The primary lock is the locking mechanism of an individual crimp contact in the connector housing.

If necessary, housing securing mechanisms (secondary locks) must be released or removed using specified tool before releasing the contacts. Refer to SECONDARY LOCK .

The shapes of the primary locks depicted in the following are only a selection which, as an example, should make clear the various functions of the primary lock.

The allocation of the correct release tool for the respective locks can be found in the table in the : VAS1978/35  Operating Instructions.

scientia non olet · About LEMON Manuals