PROTECTIVE HOUSING FOR Auxiliary Battery -A1-, REMOVING AND INSTALLING, 0K4 AND VH0: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Auxiliary Battery -A1-. Refer to Auxiliary Battery -A1-, REMOVING AND INSTALLING, VH0 AND VH0 .
-- Remove the bolts -4 and 6-.
-- Remove the front crashpad -8- with retaining bracket -5-.
-- Free up the ground cable -2- with the Battery Monitoring Control Module -J367- on the protective housing.
-- Remove the bolts -3, 7 and 9-.
-- Remove the cover plate -1-.
-- Remove the pressure vent tube -5- by pressing the catches on both sides -arrows-.
-- Loosen the bolt -3- for the retaining bracket -2- four turns.
-- Remove the Auxiliary Battery - A1- -4- from the housing -1-.
- Follow the disposal regulations for batteries when disposing of them. Refer to Battery .