Seat Heating Element, Removing And Installing: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Cover and cushion separated. Refer to COVER AND CUSHION, SEPARATING, BENCH SEAT .

A5 Coupe/Sportback:

-- Cut the wire -3- directly at the old heating element.

-- Align the new heating elements -1- on the cushion -2-.

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Audi A5 Cabriolet:

Courtesy of AUDI OF AMERICA, LLC

-- Cut the wire -2- directly at the old heating element.

-- Align the new heating elements -1- on the cushion -3-.

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Further installation is the reverse order of removal.