Cover And Cushion, Removing And Installing, Bench Seat, A5 Coupe/SPORTBACK: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

Versions with Storage Tray:

-- Remove the storage tray. Refer to STORAGE TRAY, REMOVING AND INSTALLING .

-- Remove the clips -2- using the :80-200 .

GWWA74-10696

Courtesy of AUDI OF AMERICA, LLC

-- Pry the cover clamping strip -3- out from the molded part using a screwdriver along the seat frame.

-- Disengage the cover molding -1- from the center area of the seat frame.

Continuation for All Seat Versions:

GWWA74-10627

Courtesy of AUDI OF AMERICA, LLC

-- Remove the clips -1- using the :80-200 .

-- Pry the cover clamping strip -3- out from the molded part using a screwdriver along the seat frame.

-- Disengage the cover molding -2- from the seat frame at the rear.

-- Disengage the molding -1- from the seat frame.

GWWA74-10663

Courtesy of AUDI OF AMERICA, LLC

-- Pry the clamping strip -4- out of the molded part using a screwdriver.

-- Remove the clips -2- using the :80-200 .

-- Open the Velcro fasteners -3-.

-- Remove the cover and cushion from the seat frame.