Seat Heating Element, Removing And Installing, Seat Depth Adjuster: Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- Cover and cushion separated. Refer to SEAT DEPTH ADJUSTER SEAT CUSHION, REMOVING AND INSTALLING .
-- Cut the wire directly on the old heating element.
-- Align the new heating element -arrow- on the cushion.
-- Peel the protective film off the heating element. Be careful not to damage the heating element.
-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.
Further installation is the reverse order of removal.