Seat Heating Element, Removing And Installing, Seat Cushion: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Cover and cushion separated. Refer to SEAT PAN COVER AND CUSHION, SEPARATING .

-- Clip the wires directly at the heating elements.

Standard/Sport Seat:

Courtesy of AUDI OF AMERICA, LLC

-- Align the new heating elements -arrow- on the cushion.

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

NOTE:

The Sport seat is shown.

Super Sport Seat:

Courtesy of AUDI OF AMERICA, LLC

-- Align the new heating elements -arrow- on the cushion.

-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Route the connecting wires to the individual heating elements in the base of the gaps.

Further installation is the reverse order of removal.