LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Locking Mechanism Trim, Removing And Installing >> Locking Mechanism Trim, Removing And Installing, A5 Cabriolet

Locking Mechanism Trim, Removing And Installing, A5 Cabriolet

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Locking Mechanism Trim, Removing 

-- Release the rear seat backrests.

-- Unclip the locking mechanism trim -1- from the rear panel using the : 3409  in direction of -arrows-.

GWWA70-12772Courtesy of AUDI OF AMERICA, LLC

Locking Bracket Trim, Removing 

GWWA72-12439Courtesy of AUDI OF AMERICA, LLC

-- Unlock the rear seat backrest.

-- Unclip the locking bracket trim -1- from the backrest using the : 3409  -arrows-.

Installing 

Install in reverse order of removal.