LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Lock Cylinder, Removing And Installing >> Removing

Lock Cylinder, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the locking mechanism trim and the lock cylinder. Refer to LOCKING MECHANISM TRIM, REMOVING AND INSTALLING, A5 COUPE/SPORTBACK .

-- Make sure the indicator is in the >>top<< position.

CAUTION:

Risk of destroying the lock cylinder.

  • The lock cylinder may only be removed and installed with the key properly inserted to prevent the tumblers and pressure springs from falling out.

-- Release the 4 tabs -lower arrows- and push the lock cylinder -3- with the key -2- out of the trim -1-.

Fig 1: Identifying Lock Cylinder Installation Position
GWWA72-10659Courtesy of AUDI OF AMERICA, LLC