LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Inner Mounting Pin, Removing And Installing >> Removing

Inner Mounting Pin, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the backrest from the center bearing. Refer to CENTER BRACKET, REMOVING AND INSTALLING .

-- Remove the chafe protection -4- and then remove the mounting pin -3- from the backrest frame -1-.

Fig 1: Exploded View Of Inner Mounting Pin
GWWA72-10647Courtesy of AUDI OF AMERICA, LLC

-- Remove the bearing sleeve -2- from the mounting pin.

NOTE:

For clarity, the cushion and cover are not shown.

scientia non olet · About LEMON Manuals