Front Belt Anchor, Removing And Installing, A5 SPORTBACK: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2022 Audi A5 Sportback, and 2021 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat all the way forward and up.
-- Unclip the cover -1- on the belt end fitting in direction of -arrows- and fold it up.
CAUTION:
Risk of damaging the spring -2- if it is removed incorrectly.
- So that the spring does not bend, only move it so far until the tab on the spring can be released.
- Replace the three-point seat belt if the spring gets bent.
-- Release the spring catches -2- by inserting a small screwdriver in the opening in the spring in direction of -arrow-.
-- Slide the belt end fitting -3- downward and disengage at the pin -1-.