LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 234 (Passenger Protection, Airbags, Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belt Fastening Detection >> Front Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING >> Removing

Front Passenger Seat Occupant Detection Sensor -G128-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi RS 5, 2022 Audi A5 Sportback, and 2021 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front passenger all the way back to the highest position.

-- Disconnect the connector -2- for the passenger occupant detection sensor.

GWWA69-11090Courtesy of AUDI OF AMERICA, LLC

-- Unclip the mount -1- from the seat pan -arrows- and remove the passenger occupant detection sensor -3-.