LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Lubrication [CYMC]) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pan Lower Section, Removing And Installing >> Oil Pan Lower Section, Removing And Installing, Version 1 >> Notes

Oil Pan Lower Section, Removing And Installing, Version 1: Notes

WARNING: This page is about a different car, the 2020 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model, preliminary work may be required.

-- Disconnect the connector from the Oil Level Thermal Sensor -G266- -arrow-.

Fig 1: Disconnecting Connector For Oil Level Thermal Sensor -G266-
GWWA17-0215Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 19-.

Fig 2: Identifying Lower Oil Pan, Tightening Sequence
GWWA17-10413Courtesy of AUDI OF AMERICA, LLC

-- Remove the oil pan, if necessary loosen by applying light strikes with a rubber hammer.

-- If the oil pan lower section is replaced, remove the Oil Level Thermal Sensor -G266-. Refer to Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING .