Overview - Engine Oil Cooler
WARNING: This page is about a different car, the 2020 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
- Sub-Assembly Bracket
- There are different versions.
- Removing and installing. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
- Seal
- Always replace after removing.
- O-Rings
- Always replace after removing.
- Coat with engine oil
- Mechanical Switch Valve
- Replacing. Refer to MECHANICAL SWITCH VALVE, REMOVING AND INSTALLING .
- Engine Oil Cooler
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
- See note. Refer to OVERVIEW - OIL PAN/OIL PUMP, VERSION 1 .
- Seal
- Always replace after removing.
- Coat with coolant
- Connection
- Bolt
- 8 Nm + 45°
- Always replace after removing.