2020 Vehicle Detail Report

WARNING: This page is about a different car, the 2020 Audi S5 Sportback and 2020 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

All Vehicles Audi Vehicle Condition Report


_{Stock Number}	_{Dealer Number}	_{R.O. Number}

_VIN		_Model

CAUTION:

DO NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery. Refer to TSB 2009967 for Detailer responsibilities, specific use of chemicals, and for part numbers to order materials.

Only operate power convertible top with engine running to conserve battery power (A5 / S5 Cab, R8 Spyder ONLY).

DO NOT allow convertible top to remain in a partially opened or partially closed position for longer than 5 minutes. This will cause the top to stop functioning and will require service (A5 / S5 Cab, R8 Spyder ONLY)

DO NOT treat vehicle parts painted with matte finish paint with conventional polishing materials or hard wax. Specific matte paint care products can be found in the Touch Up Paint and Service Supplies eStore in Access Audi. Use of conventional polishes and waxes can destroy the matte finish effect.

√ all completed items

Exterior - Prior to Delivery
□	Remove protective covering
□	Wash / Dry vehicle exterior including inside door jambs and under trunk
□	Inspect painted surfaces / molding / glass and remove any residue
□	Inspect body for paint defects and damage. Repair any damage before delivery to the customer
□	Check interior floors, sunroof, trunk, front and rear windshield, and all windows for water leaks
□	Apply either 3M™ Premium Liquid Wax or 3M™ Perfect-It™ Show Car Paste Wax to wax the vehicle (excluding vehicles painted with a matte paint finish).
□	Clean front and rear windshield using 3M™ Glass Polishing Compound. Refer to TSB 2020552 for details
□	Apply 3M™ Premium Liquid Wax to the wheels (except chrome wheels) to protect rims from brake dust.
□	Ensure tire pressure is set to Normal Load Condition prior to delivery. Refer to MY 2020 NORMAL LOAD CONDITION TIRE PRESSURES .

Under Hood - Prior to Delivery

CAUTION:

DO NOT TOUCH ORANGE HIGH VOLTAGE WIRES (Q5 TFSIe, A7 TFSIe, A8 TFSIe, e-tron only)

□	Wipe down engine compartment and remove excess water from grille and hood area IMPORTANT: DO NOT use dressings or chemicals containing silicone!

Interior - Prior to Delivery
□	Clean all glass / sunroof (if equipped / interior rear view mirror and visor mirrors)
□	Remove all trim protection / coverings / stickers / decals

CAUTION:

Do not remove airbag warning triangle / warning.

□	Check upholstery / clean as required
□	Check for excessive grease on seat tracks / clean as required
□	Check all interior surfaces / compartments (including sun visors / headliner) for marks or fingerprints. Clean as required
□	Vacuum carpet
□	Check luggage compartment and vacuum
□	Install front / rear floor mats (including locking clip / tabs if applicable) / check that color matches

Final Detail Quality Inspection
□	Re-inspect vehicle for surface scratches, swirl marks, paint chips, dents, wax residue, dust, or lint, preferably in an area where vehicle is to be delivered. If this is not possible, inspect vehicle in shop under fluorescent lights or in bright sunlight. Repair any damage before delivery to the customer

Detailer

I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery


_{Signature / Title}			_{Completion Date}

_{Effective 5-15-2019-US - Version 1.0}