2020 Vehicle Condition Report

WARNING: This page is about a different car, the 2020 Audi S5 Sportback and 2020 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

All Vehicles Audi Vehicle Condition Report


_{Stock Number}		_{Dealer Number}		_{R.O. Number}

_VIN				_Model

√ all completed items

Initial Vehicle Inspection
Complete the following checks within 2 business days (48 hours) of receiving a vehicle
□	Remove full body cover (if installed) following TSB 2009967. Check for transportation damage >>Note: This is a two-person task<<		□	Set tires to maximum recommended tire pressures listed on the B-pillar doorjamb, and store tire pressure values in Car / System menu. (Unless it is a sold unit awaiting customer pick up. If so, set the tire pressures to the "Normal Load Condition Tire Pressures". Refer to MY 2020 NORMAL LOAD CONDITION TIRE PRESSURES .)
□	Remove transportation wheel covers (if installed) and check for transportation damage.		□	Perform a battery test and attach the results to this Information
□	Verify all keys are included		□	Must fuel with 91 Octane or higher (S3, RS 3, S4, S5, S6, S7, S8, SQ5, Q7, TTS & TT RS)
□	Verify the plastic Audi connect Vehicle Code Tag is included (e-tron, A4, S4, A5, S5, RS 5, A6, S6, A7, S7, A8, Q5, Q7, Q8)		□	Inspect body for paint defects and damage. Report any damage immediately and arrange for repair as soon as possible
□	Inspect painted surfaces / molding / glass


I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards.


_{Signature / Title}			_{Completion Date}

_{Effective 5-15-2019-US - Version 1.0}