Vibration Damper, Removing And Installing, Starter Generator: Notes
WARNING: This page is about a different car, the 2020 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Wrench - 21mm:T40263
- Adapter:T40314
- Counterhold:T40378 or
- Counterhold:T40379
- Vibration Damper Assembly Tool:T10531
- Vibration Damper Assembly Tool - Adapter:T10531/5
- Assembly Tool:T10531/5-/6
- The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described in the following.