Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2020 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Vehicles with Generator:

Courtesy of AUDI OF AMERICA, LLC

-- Install the ribbed belt. Refer to Figure.

-- Turn the tensioning system slightly in direction of -arrow- and remove the :T10060A .

Vehicles with Starter Generator:

Courtesy of AUDI OF AMERICA, LLC

-- Install the ribbed belt. Refer to Figure.

-- Turn the tensioning system slightly in direction of -arrow- and remove the :T10060A .

Continuation for All Vehicles:

-- Release the tension on the tensioner.

-- Check whether the ribbed belt is routed correctly.

-- Start the engine and check whether the ribbed belt runs correctly.