Ribbed Belt TENSIONING Damper, Removing And Installing, Vehicles With Starter Generator

WARNING: This page is about a different car, the 2020 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the ribbed belt from the tensioner. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the tensioner -1-.

Installing

Install in reverse order of removal and note the following:

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

Tightening Specifications

Refer to OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE, VEHICLES WITH STARTER GENERATOR