Balance Shaft, Removing And Installing, Intake Side: Removing

WARNING: This page is about a different car, the 2020 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the radiator. Refer to OVERVIEW - COOLANT PIPES .

-- Remove the coolant pump toothed belt. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .

-- Remove the camshaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the drive wheel -1- for the coolant pump toothed belt.

-- Remove the bolt -1- and the intermediate shaft sprocket.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the mounting pin -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- for the intake side balance shaft and remove the balance shaft.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -1-.