Exhaust Pipes/Mufflers, Disconnecting: Procedure
WARNING: This page is about a different car, the 2020 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Separate the exhaust pipes at a right angle at the notch -arrow- using a :VAS6254 .
-- When installing, position the clamping sleeves -arrows- on the center of the separation cut.
-- Install the clamping sleeves. Refer to Figure.
-- Install the exhaust system without tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .