LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Headlamp Washer System >> Washer Nozzles, Removing And Installing >> Washer Nozzles, Removing And Installing >> Removing

Washer Nozzles, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air intake grille. Refer to Front Bumper .

-- RS 5; remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Place the drip tray underneath.

-- Tilt the washer nozzle -1- out of the mount on the bracket -4- in direction of -arrow- and remove.

GWWA92-10432Courtesy of AUDI OF AMERICA, LLC

-- Remove the washer fluid hose -2- by pressing the release buttons -3 and 5-.

-- Seal off the hose coupling with clean plugs from the :VAS6122  .