CROSSMEMBER Brace, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Disengage the storage compartment and push it to the side.
-- Remove the screws -A and B arrows-.
-- Remove the nut -arrow C-.
-- Tilt the inner brace -1- forward and remove from the threaded pin at the A-pillar.