Spring Element For Bumper Cover Bracket, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, and 2021 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the impact member. Refer to Impact Member, Removing And Installing .
CAUTION:
Risk of injury due to flying metal shavings.
Irritation and injury to skin and eyes possible.
- Wear protective eyewear.
- Wear safety gloves.
-- Drill out the rivet heads -arrows-, drive out the rivet shafts and remove any rivet remnants.
-- Remove the spring element -1- for the bumper cover bracket.