Rear Fender Cover, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi S5, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, and 2021 Audi S5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
-- Version 1: release the retainer in direction of -arrow A- and remove the stop buffer -1- from the threaded pin in direction of -arrow B-.
-- Version 2: remove the nut -1- and remove the stop buffer -2-.
-- If equipped, remove the large cover for the fender. Refer to Fender Front Cover, Removing And Installing, Large Version .
-- Release the retainers -2- in direction of -arrow- and remove the rear cover -1- upward.