After-Run Coolant Pump -V51-, REMOVING AND INSTALLING, AUDI A6/A7: Installing

WARNING: This page is about a different car, the 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi RS 5 Sportback, and 2021 Audi A5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.
Used coolant cannot be used again.

-- Connect the coolant hose to the connector coupling. Refer to Figure.

-- Fill with coolant. Refer to COOLANT, FILLING .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .