LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Air Conditioning) >> 87 Air Conditioning >> Refrigerant Circuit >> High Pressure Sensor -G65-, Removing And Installing >> Installing

High Pressure Sensor -G65-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Replace the O-ring seal -B-, and coat lightly with refrigerant oil before installing. Refer to REFRIGERANT CIRCUIT SEALS .

-- Tighten the High Pressure Sensor -G65- -A-.

Tightening specification:

scientia non olet · About LEMON Manuals