CLUTCH PLATE, REMOVING AND INSTALLING, A/C COMPRESSOR "Denso" (WITH A/C CLUTCH -N25-): Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- The thread of the new clutch plate has already been greased with a specific amount of a grease by the manufacturer.
-- Clean the contact surfaces on the clutch plate and belt pulley before attaching.
-- Clean the A/C compressor shaft threads before attaching the clutch plate.
-- After tightening, check the gap dimension between the belt pulley and clutch plate and correct it if necessary. Refer to GAP DIMENSION BETWEEN BELT AND CLUTCH PLATE, CHECKING, "Denso" A/C COMPRESSOR, WITH A/C Clutch -N25- .