Contact Corrosion
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.
Contact corrosion can occur if inappropriate fasteners (bolts, nuts, washers, rivets, plugs, grommets, adhesives etc.) are used.
For this reason, the manufacturer only installs fasteners with a special surface coating. Also, rubber and plastic parts and adhesive consist of materials that do not conduct electricity. These parts, which have been tested and are aluminum compatible, are also available as replacement parts. Refer to the Parts Information.
Note:
- Always install new parts if there is any doubt as to whether parts can be reused.
- Original equipment replacement parts are recommended. They have been tested and are compatible with aluminum. Refer to the Parts Information.
- Audi accessories are recommended. Refer to Parts Information.
- Contact corrosion damage is not covered under warranty.