LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> A5 Quattro Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 187 (Bumpers) >> 63 Bumpers >> Rear Bumper >> Bumper Cover Trim Molding, Removing And Installing >> Bumper Cover Trim Molding, Removing And Installing, A4 Lines, A5 Lines And A4 ALLROAD From Product Improvement >> Installing

Bumper Cover Trim Molding, Removing And Installing, A4 Lines, A5 Lines And A4 ALLROAD From Product Improvement: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Place the trim molding on the lower section of the bumper cover and push in. The catches must fully engage when doing this.

scientia non olet · About LEMON Manuals